A residential property manager usually does not need a CMMS as a separate system. A CMMS (computerized maintenance management system) organizes maintenance around equipment: asset registers, meter readings, and parts stockrooms. A residential portfolio's maintenance is four jobs: resident requests, work orders, recurring service, and a contractor bench, and property management software with those built in covers them. A CMMS earns its place when you run a central plant or an in-house crew with a stockroom.
You already run a maintenance operation: residents report problems, the contractor you trust gets the call, the job is closed, and the bill is paid. Then a demo, a consultant, or an owner's RFP asks which CMMS you use, as though the answer should be a product name. The better first question is which of a CMMS's jobs your buildings have. A CMMS tracks every work order by equipment and component. Yours arrive by resident and unit.
What a CMMS is, and what it was built to do
A CMMS, or computerized maintenance management system, is software that plans, assigns, and records maintenance work on physical equipment. The US Department of Energy's Federal Energy Management Program, in its Operations & Maintenance Best Practices guide (Release 3.0, August 2010), defines a CMMS as "a type of management software that performs functions in support of management and tracking of O&M activities." The guide's list of typical CMMS functions includes these:
- Work order generation, prioritization, and tracking by equipment or component.
- A history of every work order, sortable by equipment, date, and the person who responded.
- Maintenance procedures, warranty information, and technical documents stored by component.
- Preventive maintenance work orders generated by calendar or by run time.
- Capital and labor cost tracked by component.
- A parts and materials inventory with automated reorder.
- Outside service calls and dispatch.
Read that list for its recurring phrase: by component. A CMMS is organized around the machine, and it was built for places where the equipment is the operation: a production line, a hospital's plant, a campus, a fleet, each with a maintenance department that works from the register. The same guide tells buyers that "feature overload" is a common complaint of active CMMS users, and asks whether they are purchasing more than they need.
Which CMMS jobs a residential portfolio has
A residential portfolio has some of a CMMS's jobs and not others. The table takes the functions on the Department of Energy's list one at a time, says whether an apartment or condominium portfolio has that job, and names what carries it.
| CMMS function | Does a residential portfolio have the job? | What carries it |
|---|---|---|
| Work orders | Yes, daily, and most begin with a resident's request | A work order linked to the request, the unit, and the building |
| Work history | Yes, by building, unit, and contractor | The closed work orders on the building's and the contractor's records |
| Preventive maintenance by calendar | Yes: filters, boiler service, fire alarm tests, elevator inspections, gutters | Recurring work orders on a schedule |
| Preventive maintenance by run time or meter | Rarely, and only where your own staff run a central plant | The plant's service contractor, or a CMMS |
| Procedures, manuals, and warranties | Yes, for a few systems in each building | Documents filed on the building and on the job |
| Parts and materials inventory | Only with an in-house crew and a stockroom | A CMMS or an inventory tool |
| Cost tracking | Yes, per job and per building | The vendor's bill recorded on the work order |
| Outside service calls | Yes: plumbers, electricians, and elevator mechanics are usually outside contractors | A contractor directory by trade, with your preferred vendors ranked |
Five of the eight are everyday residential work, and they share one trait: they are organized by resident, unit, building, and contractor, never by component. Two belong to operations that run their own equipment and stock their own parts, and the manuals are few enough to keep as files. How the request side of that work gets sorted before a person reads it is covered in AI Maintenance Intake: What Replaces the Manual Decisions.
What facilities management covers in a residential portfolio
Facilities management is the discipline of keeping a building and its services working for the people in it. ISO 41011, the vocabulary standard for the field, defines facility management as the organizational function that brings people, place, and process together within the built environment, to improve people's quality of life and the productivity of the core business; ISO's facility management committee publishes the definition. Facility management and facilities management name the same discipline.
In a residential portfolio, facilities management covers two kinds of work. Hard services are the building's systems: heating and cooling, plumbing, electrical, elevators, fire and life safety, the roof, and the envelope. Soft services are the work around them: cleaning, landscaping and snow, waste, security, and the front desk. Property management is the other half of the job. IFMA's Facility Management Journal (June 2025) draws the line by focus: facility management on "the operational aspects and the well-being of occupants," property management on the financial and administrative side of ownership. In a rental portfolio that side is the leases, the rent, and the owner's reporting.
Most residential operators do both under one roof, which is where the software question gets tangled. Facilities management software built for an office campus or a hospital pairs a CMMS with space planning, because its customer manages desks, rooms, and equipment. A residential portfolio's facilities work is narrower and more personal: requests from the people who live there, recurring service on a calendar, contractors, and a front desk. The desk's half of that work is in Front Desk Operations for Residential Buildings.
When a residential operator does need a CMMS
A residential operator needs a CMMS when the equipment itself becomes the thing being managed. Four conditions mark that line:
- Your own staff operate a central plant: large boilers, chillers, cooling towers, or generators serviced by hours of run time as well as by date.
- You employ a trades crew large enough to need labor scheduling and a parts stockroom.
- An owner, a lender, or an insurer requires maintenance history equipment by equipment.
- The portfolio includes commercial, campus, or mixed-use space with equipment-heavy systems.
Where one of those is true, the CMMS runs beside the property system, not in place of it. The CMMS holds the equipment register; the property system holds the residents, the leases, the requests, and the books, and the work order number is the bridge between them. A second system is a second place to record each job, so it earns its place by the equipment it tracks. If you are consolidating the other way, from two systems to one, the cutover is in How to Switch Property Management Software: Keep Your Books.
How to decide whether your portfolio needs a CMMS
Five checks, run in order on last quarter's actual work, settle whether your portfolio needs a CMMS with your own numbers instead of a vendor's.
- Sort last quarter's work orders by where each began. Count the ones that started with a resident's request, the ones that started with a scheduled service, and the ones that started with a meter reading or an equipment alarm.
- List the equipment your own staff service. Leave out anything under a contractor's service agreement; its service history arrives with the contractor's reports.
- Check whether you stock parts. A shelf of filters and faucet cartridges is a supply closet. A stockroom with reorder points is inventory.
- Ask who requires equipment-level records. Read the management agreement, the loan documents, and the insurance policy for maintenance reporting terms.
- Write down every recurring task and what triggers it. A date triggers nearly all residential service; run time triggers very little.
If the answers are residents, contractors, a supply closet, nobody, and dates, your portfolio has the four residential jobs and none that only a CMMS does. If any answer points at equipment, parts, or a contract term, price a CMMS for the buildings it applies to.
How Scaalr covers the maintenance jobs a residential portfolio has
In Scaalr the maintenance record starts where residential maintenance starts, with the resident's request. Each request is a case with a status, a priority from Low to Urgent, a category, an assignee, a due date, and the property and unit it belongs to, and the resident's email replies thread back onto it. A case links to the work order that does the repair.
A work order carries the job: the building, the originating case, the contractor, the start and due dates, the priority, the message thread, and the photos and documents. Assigning a contractor sends them the job by email, and their replies thread back onto the work order. The contractor directory is the bench: each contractor with a trade and contact details, your preferred vendors flagged and ranked in the order you choose, and a page for each one listing every work order assigned to them. On Growth and up, that ranking can also send the job for the categories you choose, which is covered in Automatic Contractor Dispatch: Which Cases Leave on Their Own.
Recurring maintenance is a schedule, not a reminder. A recurring work order or case files itself weekly, every few weeks or months, quarterly, or yearly, on the weekday or day of the month you set, until a date, for a set number of times, or until you end it. The Recurring Schedules page lists every schedule with its next date, its cadence, its building, its contractor, and its state, and flags one whose contractor can no longer be notified. A schedule can be paused for a season and resumed, or run early when the work is needed now. Building that schedule task by task is covered in How to Set Up a Preventive Maintenance Schedule for Buildings.
History reads the way a residential portfolio asks for it. A property's page has a tab for its cases and a tab for its work orders, and the home dashboard's Happening today feed lists the work orders due today and carries over the overdue ones. The cost of a job is the vendor's bill recorded as an invoice on its work order, which posts to the ledger; that part is Growth and up, and it is the subject of Track Maintenance Costs per Property With Work-Order Invoices. On Growth and up, with AI enabled, Alex writes a plain-language summary on each case and work order and flags urgent cases to the people you designate.
Cases, work orders, recurring schedules, and the contractor directory are on every plan, including Starter: free for the first 5 units, then $0.99 a unit a month. Growth is $99 a month for the first 50 units, then $1.49 per additional unit. The product summary, from the request to the paid bill, is on the property maintenance software page.
Key questions
What is the difference between a CMMS and property management software?
A CMMS organizes maintenance around equipment; property management software organizes the whole operation around residents, units, leases, and buildings. A CMMS knows a pump's service history and its spare parts. Property management software knows who lives in the unit, what they reported, which contractor fixed it, what it cost, and how the bill reached the books. A residential portfolio needs the second record for every job and the first for very few.
What are examples of a computerized maintenance management system?
They come in three kinds. Standalone CMMS products are sold to plants, hospitals, campuses, and fleets, and are built around an equipment register. Enterprise asset management suites add capital planning and procurement for large organizations. Maintenance modules sit inside industry software, property management software included, and carry work orders and recurring service without the register. Which kind fits depends on whether you manage equipment or requests.
Can I run preventive maintenance without a CMMS?
Yes, when the maintenance is triggered by dates. Residential preventive maintenance is mostly calendar work: filter changes, boiler service, fire alarm and sprinkler tests, elevator inspections, gutters, and seasonal start-ups. Each needs a schedule that opens a work order on its date, names the contractor, and keeps the closed job as the record that it happened. Service triggered by run time or a meter reading is the part that calls for a CMMS.
Is a work order app enough for a residential portfolio?
For the job itself, yes: a work order app records what needs doing, who is doing it, and when it closed. Residential maintenance begins before the job and ends after it. The resident's request and replies sit in email, the contractor's bill sits in the accounting system, and the building's history is split between them. A work order app is enough when another system already holds the resident and the bill.
What is a CMMS web portal?
A CMMS web portal is the browser page where people outside the maintenance team submit requests and check their status, and where technicians see the work assigned to them. In a residential portfolio those two jobs are the resident's way to report a problem and the contractor's view of the jobs assigned to them. Either one works when a reply lands on the record of the job it is about.
Do I need elevator management software for a residential building?
No, in most residential buildings. An elevator is maintained by a specialist contractor under a service agreement, and what you keep is the calendar of visits and inspections, the contractor's reports, and a record of each outage. A recurring work order holds the calendar, and each visit's work order holds the report. Booking the elevator for a move is a separate job that belongs to the front desk.
Is Scaalr a CMMS?
No. Scaalr is property management software with the maintenance a residential portfolio has built in: resident requests, work orders, recurring schedules, and a contractor directory, in the same system as the leases and the books. Its records are organized by building, unit, and contractor. A portfolio that also runs equipment-level programs keeps the equipment register in a CMMS beside it.
Which Scaalr plan includes work orders and recurring maintenance?
Every plan. Cases, work orders, recurring schedules, and the contractor directory are on Starter, free for the first 5 units and then $0.99 a unit a month. Growth, at $99 a month for the first 50 units and then $1.49 per additional unit, adds invoices on the work order and, with AI enabled, Alex's case and work order summaries and urgent-case flags.