A property incident report records what happened, where, and when; who was involved and who saw it; what staff did and whom they called; and what evidence exists, from photos to the police or fire report number. Write it the same day, as facts in the order they happened, and leave fault and diagnosis out. The report is read later by someone who was not there.

When something happens in your building, you and your staff handle it: the water is shut off, the ambulance is met at the door, the family is called. That work is real, and most nights it goes right. What is left of it afterward is whatever was written down, and the people who read it (an adjuster, an officer, a lawyer, the manager who takes over the building) were not there. A claim can arrive months after the event, and by then the report is the only account that has not changed.

What a property incident report is

A property incident report (an accident report or an occurrence report, in older binders and security contracts) is the building's own dated, factual account of an event that hurt someone, damaged property, or put either at risk. It is written by the staff who saw or handled the event, for whoever has to understand it later.

An incident report is a different record from a maintenance request or a complaint: a dripping tap is a request, and water coming through a ceiling is an incident. The test is who might ask about the event later. When the answer includes an insurer, the police, a regulator, or a lawyer, the event gets a report. Incident reports are one of the records a staffed desk keeps; Front Desk Operations for Residential Buildings maps the full set.

What counts as an incident in a residential building

An incident in a residential building is any event with a safety, security, or liability consequence: someone was hurt, something was damaged or taken, emergency services came, or staff had to act outside the routine. Each type takes the standard report plus one detail that is easy to miss, and the table lists that detail for thirteen types of incident.

Type of incident The detail this type needs
PoliceThe officer's name and badge number, and the report or occurrence number
FireWhen the alarm sounded, which department attended, and its incident number
Medical emergencyWho called for help, when the ambulance arrived, and where the person was taken
TheftWhat was taken, where and when it was last seen, and whether police were told
VandalismThe exact location, photographed before cleanup
TrespassingA physical description, how the person got in, and how they left
Suspicious activityWhat was observed, by whom, and the direction of travel
Property damageWhat was damaged, the apparent source, and any cost marked as an estimate
Equipment malfunctionWhich equipment, who was affected, and when the service company was called
Weather eventWhat the weather did, the areas affected, and when walkways were treated
Water leakThe source if known, the units affected, and when the water was shut off
LockoutWho was let in, how their identity was confirmed, and which key was used
OtherA subject line specific enough that the report can be found again

A close call belongs in the record too. OSHA encourages employers to investigate close calls (near misses) as well as incidents in which a worker was hurt, and the reasoning carries over to a building: the stair tread that someone caught themselves on is the same tread next week.

What a property incident report should include

A property incident report should include eleven things, and each one answers a question the building is asked later:

  • A subject line that says what happened and where, so the report can be found again.
  • The date and time of the event, and separately the date and time the report was written.
  • The exact location: the building, the floor, the unit or common area, and the spot within it.
  • The type of incident.
  • The people involved: names, units or phone numbers, and whether each is a resident, a visitor, a contractor, or staff.
  • Who reported it and who wrote it down, often two different people.
  • The witnesses, with a way to reach each one.
  • The narrative: what happened, in order, as it was seen and heard.
  • The actions taken: what staff did, whom they called, and when each responder arrived.
  • Injuries and damage as observed, with any dollar figure marked as an estimate.
  • The evidence and the follow-up: photos, documents, where any footage is held, outside report numbers, and what is still open.

The names of non-residents in the building at the time come from the visitor log, which Visitor Management for Condos and Apartment Buildings covers.

How to write the incident narrative: facts, in order

The incident narrative is the paragraph everyone reads, and it holds what was seen, heard, and done, in the order it happened. Write in the first person for what you saw (I saw, I heard, I called), and attach a name to everything you were told (the resident said, the contractor said). Give times as clock times, and say so when a time is an estimate.

The harder discipline is keeping conclusions out, because in the moment the conclusion feels like the most useful thing to record. "The floor was dangerous" is a conclusion; "the floor was wet from the door mat to the elevator, and no sign was out" is a fact. HAI Group, an insurer of public and affordable housing, gives housing organizations the rule in five words: "State facts and omit opinions" (November 21, 2024). The same guidance advises against taking responsibility for an incident before it has been investigated; fault is for the investigation to decide.

Where the narrative has to include something nobody saw, say so. The Canadian Centre for Occupational Health and Safety, writing for workplaces, asks that a report show which conclusions rest on physical or documentary evidence, which on a witness's account, and which on an assumption (fact sheet last revised June 23, 2025).

How to write an incident report, step by step

Writing an incident report starts once the emergency is under control, and the steps are the same whatever the incident:

  1. Deal with the emergency first. First aid, the fire department, and the shutoff valve come before the report.
  2. Photograph the scene before anything is moved or cleaned, the wide view first and then the details.
  3. Note the times while they are fresh: when it happened or was found, when each call was made, and when each responder arrived and left.
  4. Take names and contact details for everyone involved and everyone who saw it, and hear each witness alone, so one account does not become everyone's.
  5. Record what you did: the valve closed, the area blocked off, the elevator taken out of service, and whom you notified.
  6. Write the narrative before the shift ends, in order, as facts.
  7. Secure the footage. Note the camera and the time window, and ask for the clip to be kept before the recorder overwrites it.
  8. Add the outside numbers as they arrive: the police report or occurrence number, the fire department's incident number, the insurer's claim number.
  9. Set a follow-up date and an owner, and close the report when the repair, the claim, or the conversation it started is finished.

Steps 2, 4, and 7 follow the Canadian Centre for Occupational Health and Safety's guidance on incident investigation, written for workplaces: photograph before anything is moved, interview witnesses separately and as soon as possible, and retrieve video before it is overwritten (fact sheet last revised June 23, 2025). Attach the photos to the report the same day; a photo that stays on a phone leaves with the phone.

Follow-up: an incident report stays open until the matter is closed

An incident report is finished when the matter is, usually well after the narrative is written. Follow-up is what the event still owes: the repair, the notice to the insurer, the call back to the resident, the police report number that was not available that night. Give each open report a follow-up date and one owner, and close it with a date and a name. HAI Group, the housing insurer, tells housing organizations to notify the insurer of every incident involving an injury or property damage; ask your own insurer what it wants reported and how soon.

Read the closed reports together a few times a year. Three reports about the same garage door are one maintenance finding, and OSHA's guidance for workplaces describes the purpose of an investigation the same way: finding and correcting root causes, not fault. Where an incident needs a repair, the repair runs as a work order, the side of the building that CMMS for Residential Property Management: Do You Need One? covers.

How Scaalr files an incident report

In Scaalr, an incident report is filed from the building's front desk or from the property's page. The form takes a subject, the building and, where it applies, the unit, the event date and time, the type, who reported it, and a written summary. The type is one of thirteen: police, fire, medical emergency, theft, vandalism, trespassing, suspicious activity, property damage, equipment malfunction, weather event, water leak, lockout, or other. The residents involved are picked from the building's own directory, so each name on the report is a person on file.

Photos, PDFs, and documents attach to the incident, up to 10 files of up to 100 MB each. The report downloads as a branded PDF under your company's logo, with the subject, the building and unit, the type, the event date and time, who reported it, who logged it and on what date, the description, and the residents involved. It is the building's own account, fit for handing to an insurer or an officer.

Every incident is open or closed. An open incident carries a follow-up date and notes, and the desk's incident list shows each incident's status and follow-up date, flags an overdue follow-up, and names who logged the report. Open incidents sit on the building's front desk board, and staff who cover several buildings see a count on each building's card. Closing an incident records who closed it and when. Where a repair is needed, a Create Work Order button, shown to staff who can create work orders, opens the work order form with the building filled in and a title naming the incident, and the repair runs as its own record.

A security guard's login, restricted to the front desk of the buildings they are assigned to, files incidents there; deleting an incident, or removing a file from one, takes someone with permission. Incident filing is on the Growth and Scale plans: Growth is $99 for the first 50 units, then $1.49 per additional unit. The report sits in the same system as the rest of the desk, beside the visitor log and the fob and key record that Access Fobs: Issuance, Returns, and the Lost-Fob Protocol covers.

Key questions

Is an incident report the same as a police report?

No. An incident report is the building's own record, written by its staff. A police report is the police service's record, written by the officer who attended and released on the police service's terms. Write the incident report whether or not police come, and when they do, add the officer's name, the badge number, and the report or occurrence number, so each record leads to the other.

Who should write the incident report?

The person who saw the incident or was first told about it, in their own words: the guard, the concierge, the superintendent, or the manager. When two staff members responded, each writes what they saw, so the report holds two accounts instead of one agreed version. A supervisor reads the report for missing fields and owns the follow-up, and the account stays in its author's words.

How soon should an incident report be written?

Before the shift ends, and no later than the next day. Detail fades, and accounts drift toward each other the longer they wait. A company deadline is the outer limit, and the report carries two times either way: when the event happened and when the report was written.

How long should a building keep incident reports?

At least as long as someone can still bring a claim over the event. That period is set by the law where the building stands and differs by the kind of claim, so ask your insurer and your lawyer for the number and write it into the building's retention rule. Keep the photos and documents with the report for the same period. A report that outlives its evidence is half a record.

What goes in an incident report for a slip and fall?

Everything in a standard incident report, plus the conditions: the exact spot, the surface and what was on it, the lighting, the weather, any warning sign or mat in place, and what the person said about how they fell, in their words. Photograph the spot before it is cleaned, salted, or repaired, and note the first aid offered and whether an ambulance came. The cause is for the investigation to find.

What should a security guard write in an incident report?

What the guard saw, heard, and did, in order, with times: where they were when it started, what they observed, what they did, whom they called, and when each person arrived. Descriptions of people stay physical (height, clothing, direction of travel), and every statement is attributed to the person who made it. The guard writes the report before the shift ends, because the next shift inherits the building, not the memory.

Is there a template for a property incident report?

Yes, and it fits on one page: a subject line, the date and time of the event, the exact location, the type, the people involved, who reported it and who wrote it, the witnesses, the narrative, the actions taken, injuries and damage as observed, and the evidence and follow-up. Use the same fields in the same order for every incident, so no report depends on what its writer thought to include.

← Access Fobs: Issuance, Returns, and the Lost-Fob Protocol All articles →