To notify all residents about a water shutoff, send one notice to everyone in the affected building from your resident list, and post the same notice where residents pass. The notice says what is off, which units are affected, when it starts and ends, what to do, and who to call. Send a second notice when the water is back, and keep the record of who received the first.

You have done this before: the plumber was booked, the paper went up in the lobby, and an email went to the list. The notice was true, and it was posted. The complaint arrives anyway, from the resident who says nobody told them, and a sheet of paper on a door cannot answer it. The water utility counts on you for the same relay. In the United States, the standard wording in the Environmental Protection Agency's Public Notification Rule (40 CFR 141.205) asks whoever receives a drinking water notice to share it with the other people who drink the water, especially those who may not have received it directly, and the first example it gives is people in apartments.

What a resident announcement is

A resident announcement is a notice a property manager sends to a whole audience at once about something that affects all of them: an outage, a repair, a new rule, an event. The audience can be every resident of a building, the units on one riser, every owner, or a single unit. Other tools call the same thing a mass notification, a broadcast, a bulk email, or a community announcement.

A resident announcement informs. A notice the law or the lease requires you to serve is a different instrument: a notice of entry, a rent increase, a notice ending a tenancy. Its form, its timing, and its delivery method are set by statute or by the lease, and a message to the whole building may not count as service. The rent increase is the clearest case, and its rules are covered in How and When to Raise Rent: Scheduling and Notice Periods. This guide stays with the announcement.

Why building notices miss people

A building notice misses people for four reasons, and none of them is carelessness.

  • The list is old. A resident who moved in last month, or changed email addresses, is on nobody's distribution list.
  • The audience is everyone or a guess. One riser's shutoff goes to the whole portfolio, or a building-wide notice goes to the people someone remembered.
  • The notice opens with the reason. Three sentences about the valve come before the day and the hours.
  • Nothing says it is over. Residents learn the water is back by trying the tap.

Each one is a property of how the notice was sent. The rest of this guide takes them in turn: what the notice says, who it goes to, which channel carries it, and what record it leaves.

What a water shutoff notice should say

A water shutoff notice should say six things, in the order below. The first three decide whether a resident fills the kettle, and they are all that many residents will read.

  • What is off. All water, or hot water only.
  • Where. The building, and the floors or units affected when it is not all of them.
  • When. The day, the start time, and the expected end.
  • What to do. What to fill or finish beforehand, and what to expect when the water returns.
  • Why. One clause is enough: a valve replacement, a riser repair.
  • Who to call. One name and one number for the day of the work.

Where a city prescribes the notice, it asks for the same core. Toronto's RentSafeTO program, for example, requires the owner of each apartment building it covers to keep a notification board in a central location and to post every planned or unplanned service disruption on it with three details: what is out of service, how long it will be out, and which units are affected (City of Toronto, RentSafeTO building owner requirements, page modified September 3, 2026).

A water shutoff notice to tenants: sample wording

The sample below is a water shutoff notice to tenants with the six parts in place. The brackets are yours to fill, and the subject line is written to carry the notice by itself.

Water shutoff at [building], [day and date], [start time] to [end time]

All water to [the building, or the units affected] will be shut off on [day and date] from [start time] until about [end time] while a plumber [replaces the main shutoff valve]. Before [start time], fill a kettle and a bucket, and let any laundry or dishwasher cycle finish. Keep taps closed while the water is off. When it returns, run the cold tap until the water runs clear.

Questions on the day: [name] at [phone number]. A second notice will follow when the water is back on.

How to notify all residents about a water shutoff, step by step

Notifying all residents about a water shutoff takes nine steps, from the contractor's confirmation to the all-clear.

  1. Confirm the window with the contractor. Get the day, the start, the expected end, and exactly what goes off: all water or hot water only, the whole building or one riser.
  2. Check what your lease and local rules require. Some cities set how far ahead a planned interruption must be posted and where, and the lease may carry its own notice clause.
  3. Choose the audience from the work. The whole building, the units on one riser, or a single unit, plus the owners where they need to know.
  4. Write the title to stand alone. Put what, where, and when in one line, because the subject line is all some residents will read.
  5. Put the action in the first two sentences. Say what to do before the water goes off and who to call on the day.
  6. Send it from your resident list. Send when the date is firm and again the day before, so nobody is working from last week's memory.
  7. Post the same notice in the building. Use the entrance, the elevator, and each affected floor. Paper reaches the resident whose email address is wrong or missing.
  8. Call the few who need a call. That means a resident who depends on running water for care or medical equipment, the unit directly below the work, and anyone the record shows the notice did not reach.
  9. Send the all-clear. When the water is back, say so, repeat the advice about running the tap, and take the paper down.

A planned shutoff usually starts as a line on a maintenance schedule, which is the subject of How to Set Up a Preventive Maintenance Schedule for Buildings. An emergency shutoff after a leak also leaves an incident to write up: see What Goes in a Property Incident Report and How to Write One.

Which building notices go to whom

The table compares seven common building notices: who needs each one, when to send it, and whether to ask residents to acknowledge it.

Notice Who needs it When to send it Ask for acknowledgment
Planned water shutoffResidents of the building or riser affectedWhen the date is firm, and the day beforeNo
Emergency shutoff or leakEveryone in the building, and its ownersAt once, then at each changeNo
Elevator outageEveryone in the buildingWhen it is known, and when the return date movesNo
Fire alarm testingEveryone in the buildingA few days ahead, and that morningNo
Garage or parking closureResidents with a parking spaceA week ahead, and the day beforeYes, when cars must be moved
New rule or policy changeAll residents, and owners it bindsBefore it takes effectYes
Event or seasonal reminderWhoever it concernsA week aheadNo

Two rows ask for acknowledgment because each needs something from every household: a rule to follow, a car to move.

How to notify all tenants at once: email, text, or paper

To notify all tenants at once you need two channels: one that reaches people and one that keeps a record. The table compares the four channels a building notice travels on.

Channel Who it reaches The record it leaves Where it falls short
Paper in the lobby and elevatorWhoever walks past, including residents with no emailNone of who read itIt says nothing to the resident who is away
Email to the resident listEvery resident with a current address on fileWhen it was sent to each addressIt can sit unopened in a full inbox
Text messageResidents who have agreed to textsA delivery status, where the carrier reports oneIt is too short for instructions
A notice feed residents sign in toResidents who have accessWho opened it and who acknowledged itResidents have to come to it

Email and paper are the usual pair. Paper reaches the resident whose address is wrong or missing, and some cities require the posting. A text is a useful second message on the morning of the work for residents who have agreed to receive texts. In a staffed building the desk takes the questions a notice raises, which is part of Front Desk Operations for Residential Buildings.

How to prove residents were told

Proof that residents were told is a list with a name on every line: who the notice was addressed to, when it was sent to each person, who opened it, and who acknowledged it. "Everyone was told" is what an office says when that list does not exist.

For most notices the first two columns settle the conversation with one resident: the notice went to this address at this time. Where each household's attention matters, such as a new rule or a garage closure that needs every car moved, ask for acknowledgment. Your follow-up then goes to the names still open, and the rest of the building needs nothing more from you.

A condominium corporation's notice to owners raises the same question under statute. The Ontario version is covered in When the CMRAO Inspector Asks, Scaalr Has the Receipt.

How Scaalr sends a resident announcement

In Scaalr, a resident announcement is one post. Your team writes a title and a body, picks a category (General, Maintenance, Event, Policy, or Emergency), and chooses who should see it: all residents, all owners, the residents or the owners of one property, or the residents of a single unit. Resident announcements are on every plan, including Starter.

Publishing the post does two things. It appears in the feed that residents and owners read in their portal, and each person in the audience with an email address on file is sent an email under your company's name and logo. The email carries the title, the opening lines of the notice, and a button to read the rest in the portal, which is the reason to write the title and the first two sentences to stand on their own.

Timing is part of the post. Publish it now or schedule a date and time, and set an optional date for the notice to stop showing once the work is done. A pinned post stays at the top of the feed.

Every announcement email carries an unsubscribe link, and residents and owners manage the same choice in their portal. A resident who has opted out is not emailed and still finds every notice in the feed. The exception is a notice in the Emergency category, which is emailed to everyone in the audience who has an address on file.

Mark a post as requiring acknowledgment, and the portal asks each person in the audience to acknowledge it. The post then shows, person by person, whether the email was sent, who has viewed the notice, and who has acknowledged it. From the post, your team sends a reminder to everyone who has not, and the post records how many reminders have gone out and when the last one did. The receipt exports as a CSV file.

Residents and owners reach the portal by invitation, sent from the Residents list or the Owners list. A document attached to the post is read there.

One post reaches the building, and what is left for your team is the short list of people it has not reached.

Key questions

How much notice do I have to give tenants before shutting off the water?

It depends on where the building is and on the lease; no single rule covers every market. Some cities set how far ahead a planned interruption must be posted, and others set nothing. Check your local housing code and the notice clause in the lease, then send the notice as soon as the date is firm and again the day before. An emergency repair is a different case: you notify as you act.

Can I send a water shutoff notice to tenants by email?

Yes, for an announcement. A planned water shutoff is information residents need, and email delivers it with a record of when it went to each address. Post the paper notice as well, because some cities require the posting and some residents have no current email address on file. A notice your law requires you to serve, such as a notice of entry, follows that law's delivery rules instead.

Should I text or email tenants about an outage?

Email first, because it carries the instructions and leaves a record. Add a text on the morning of the work if your residents have agreed to receive texts: a text is hard to miss, and it has room for the day and the hours, not for the details. Post the paper notice either way.

How do I notify tenants of an emergency water shutoff?

Send what you know at once: what is off, which units are affected, and when you will send the next update. An emergency notice does not wait for the cause or the repair time. Send a short update each time something changes, post paper at the entrance and the elevator, and send the all-clear when the water is back.

How do I prove a tenant received a notice?

For an announcement, keep what the channel records: the list the notice went to, the time it was sent to each address, and who opened or acknowledged it. That answers a resident who says nobody told them. For a notice the law requires you to serve, proof of service is its own requirement, so use the delivery method the law names and keep that proof.

Do residents have to acknowledge a building notice?

No. An ordinary notice needs no reply, and an acknowledgment asked for every time stops meaning anything. Ask when you need to know that each household has seen the notice: a new rule, a garage closure that needs every car moved, a change to how the building is entered. Then follow up with the households that have not answered.

How do I notify residents of an elevator outage?

Notify residents of an elevator outage the way you would a water shutoff, with two additions. Name the elevator and the date it is expected back, and update the notice when that date moves. Before the notice goes out, contact the residents who cannot use the stairs and arrange what they need for the days the elevator is down.

Which Scaalr plan includes resident announcements?

Every plan. Resident announcements, the owner and resident portal feed, acknowledgment receipts, and reminders are included on Starter, Growth, and Scale. Starter is free for the first 5 units, then $0.99 a unit a month. Growth is $99 a month for the first 50 units, then $1.49 per additional unit.

← AI for the Property Management Inbox: What Alex Handles All articles →